Replace your wooden gate in Fremont.
A sticking gate can make a useful side yard hard to reach. We install manual wooden gates in Fremont, with a standard option 6 ft high × 4 ft wide. Start with the number of gates you need, then we review the opening and supporting posts so the new gate works with your fence.
Manual wooden gates · standard option: 6 ft high × 4 ft wide.
FREMONT · PROJECT PLANNING
Street-facing and pool-area gates need a separate check.
Fremont’s residential fence guidance distinguishes street-side and rear-yard locations and identifies pool and spa barriers as a permit-related case. If your gate faces a sidewalk, lies near a corner or controls access to a pool area, tell us at the start. A standard garden gate estimate does not establish suitability for these locations; the placement and hardware need review against the applicable requirements.
Make the opening work for everyday access.
Tell us if the passage is used for bins, bicycles or garden equipment. Measure between posts and show any step or narrow paving beside them. We check the usable space with the hinges and latch in place before confirming a standard gate will fit.
Allow for a slope through the whole swing.
A leaf that clears the ground when closed can still catch the paving when opened. Photograph the full area where it swings and point out a rising path, raised bed or drain. A different swing direction or custom size may be needed, which we discuss before installation.
Find the cause of sagging before replacing the leaf.
Show us the post at ground level, the hinges and the gap at the latch. Loose hardware and a moving post need different repairs. If your leaf is sound, call us to discuss repair options; we do not price an unseen repair as a complete new gate.
Before you book
Can I add a gate while replacing the fence?
Yes. Choose fence and gate in the estimate tool and enter your fence length and the number of standard wooden gates. We confirm how the opening fits into the replacement line on the follow-up call.
Does the standard option cover a double gate?
No. The standard option is a single manual wooden gate, 6 ft high × 4 ft wide. Double gates, wide driveway openings and automatic systems need a separate scope and quote.
What if this gate leads to a pool?
Mention the pool or spa when you contact us. Barrier design and hardware require specific review; do not assume the standard pedestrian gate meets the applicable requirements.
Tell us what needs work.
Start with your project type, fence length or number of standard gates, and city. The tool collects your contact details so we can email the estimate and follow up to confirm the work.
The free tool is a starting estimate for standard pressure-treated wood and the listed dimensions. We confirm measurements, access and the agreed scope before work. Other woods, styles, heights and nonstandard openings need a separate quote.